Sinclair | Sansui Paints
Sinclair Strippable Coating is a peelable polymer in an aqueous solution manufactured by Sansui Paints, Sinclair offers temporary protection on to wide varity of non porous surfaces, no matter cement mortar, paint splatter-spills on Sinks, Marbels, Bath Tubs etc.
SINCLAIR
Sinclair Product Selection Chart
(Click To Open)
Sinclair Application Instruction
(Click To Open)
Sinclair Frequently Ask Questions
SINCLAIR COATING is water and latex based polymer with proprietary materials added for temporary protection, on variety of non porous substrates,
SINCLAIR COATING is peelable Liquid polymer, on drying forms plastic like a film, which do not adhere on the substrate and works as a masking against dirt, dust, cement mortar and other natural non avoidable aspects
Sinclair is designed for every possible substrate, pl. go thru Sansui paints website or contact our sales team, Use the product recommended for, for any unidentified substrate, contact to Technical team of Sansui paints. It is advisable to take a Patch Test. Before application.
Sinclair is one of a kind, a first to produce crystal clear Transparent Temporary protective coating, which does not obstructs natural light but makes a room pleasant , and colorful which you required
Sinclair Products is Available in varieties of Attractive Shades? And Sinclair Grades are differentiated with different shades. to Give A Decorative and Transparent Plastic Look.
SINCLAIR 702 is a MAGENTA PINK
SINCLAIR 711 is a Clear to Translucent White.
SINCLAIR 727 is an F.YELLOW
SINCLAIR 732 is a WHITE
SINCLAIR 736 is a BLUE
SINCLAIR 741 is a GREEN
SINCLAIR 753 is an L.Yellow
SINCLAIR 768 is a Turquoise Blue.
Customized Shades is Possible - in Quantities over 2000 liters.
We highly recommend you prepare the surface as you would for any type of coating. Clean, dry, oil and dust free. Wash thoroughly to remove any waxes, mold release or blush. Allow it to dry and clean. Principally This coating is not suitable for any Porous Substrates Ensure that the edges of the coating is little thick then rest of the film, which helps in easy and smooth peeling. Edges should be kept sharp, which gives grip to peel the dried Sinclair Film, - WE strongly recommend that before you apply the coating, first apply painter's tape on edges , giving the boundary line of application, followed by application, Painter tape may be removed once it is applied, Even if it is kept it will not obstruct Peelability after six months. Spray Suggest a Binks Pressure Pot with a large orifice tip (#68, gel coat tip). You should be able to get 15mil coating on a horizontal surface and 10mil on a vertical. Please see application notes, use conventional HVLP Gun , IT is advisable to apply with a Airless or Air assisted spray gun, in order to have a single coat and thicker film,
Roller use a thick nap cloth roller. Again, use plenty of material on the roller and use short strokes with light pressure. Do not try to make it go too far in one stroke; you should be able to get about the thickness of 4-5 mils covers per coat. 2- 3 coats covers will approximately equal the desired thickness of 10-15 mils. Rolling will produce a "stippling" effect. For a smoother finish, tip off very lightly with a brush after rolling,
How do I apply SINCLAIR COATING?
Spray, roll, or brush it on. The Key to SINCLAIR COATING is to build it up to a 10-15 mil minimum final application thickness regardless of how it is applied. However thickness of the coating varies with substrate, and time of protection require, Besides Film thickness, for ease in Peelability,
NO - do not use off the shelf general decorating rollers OR sponge rollers, these may not apply the product at the correct consistency.
This is very important and common question, Theoretical Coverage always very with practical, Use of Equipment, Applicator, Surrounding Atmosphere, varies with the coverage, but for a sack of your knowledge, 1 Liter covers roughly 45 square feet at a final application thickness of 10-12 mils, achieved in multiple coats.
It is general belief of an Individual to add water in a coating: Pl. DO NOT add water ". On addition of Water, you are diluting the effective ingredients, which lower the film formation. This Coating must have film thickness over 10mils,
SINCLAIR COATING air dries to the touch in about 1 hour. This varies with temperature and humidity. If outdoors, try not to apply in the late afternoon, especially in the spring when there is the chance of high humidity. Once it is dry to the touch it may be over coated
Temperature range for application is 500 F to 1000 F, however be aware that at the lower temperatures it will take longer to dry and at the higher temperature it will dry quicker. We highly recommend that the temperature of the product and the substrate be over 600 F. Just because the atmospheric temperature is 600 F does not mean the surface and material temperature is 600 F
Drying time can be improved by hot air circulation.
Yes, you can spray it. Preferred method is roller, which helps control necessary film thickness to facilitate its removal. Spray method can cause feather edges and the peelable coating film becomes difficult to remove. Keep the edges of the coating thicker; In order to ease in removal, first apply a masking tape, before application, and remove before it dries.
Enter your answer here
NO, Sinclair Coating is not suitable for any porous substrate; however it can be applied on Wooden Laminates. You may need to go to 50 mils for maximum effectiveness,
Sinclair coating has excellent water resistant, it will not dissolve its film under rain, however if water penetrates into the film, coating may turned to milky which on drying retain its original color, in order to prevent this, we suggest that the edges of the coating, be covered with painters tap 1.5', which will not allow water to enter into the film.
Coating is stable at atmospheric temperature up to 500 c, and at times it resist higher temperature, . However at time of peel off, coating needs to cool with water to bring down to room temperature of 25- 30o c.
Not all the Products are stable in acidic condition, Under Laboratory Stage we found that it is stable under acidic atmosphere; however insist for specific grades of the coating which are available on tailor made basis on volumetric requirements.
No - these products are designed such that it has excellent sag resistance even if it is coated up to 18 -20 mils dft. It won't sag. If applied by trained professional applicator.
Ideally Sinclair Coating Give Protection Over 1 Year, for Interior ,Polished Products Like Glass, Marble, Stainless Steel Sinks, etc., However Those Exposed to Sun Light or Outside Atmospheric Temperature, Give Protection over 3 Months, Again Higher Film Thickness will give longer Protection. And Better Peelability.
Peeling is very simple; following ways to remove the coating: Simple peel from one corner - entire membrane will be peeled off easily, Hold the Membrane from One End, (Remove Painter's Tape) it will automatically Peeled off Easily. If Outside Temperature is above 25-300 c Just Cool the substrates with Water, Membrane turns Little Milky, and then Peeled Off. Use of Water Jet Spray (One which is used in Auto Garage to wash the car, Membrane Will Come out Very Easily)
If Coating is applied with recommended Film Thickness: It will Come Out easily, else it will be difficult to remove as thinner coating tends to Adhere (Stick) to the substrate. But even in that case Don't Get Panic,
- Just Wet the coating with water, allow membrane to absorb water, it will turn to milky in
- 15- 30 Minutes, then Peel From One End, It will Come Out Easily
- Recommended removal temperature is between 100 c to300 c, outside this- temperature. It is recommended to use water to cool down. Then peeled smoothly
- High pressure water jet sprayer will remove difficult sections of film.
FOR AUTO MOTOBILE REMOVAL:
- Removal: Ensure vehicle/motorcycle has cooled down.
- Apply water to the entire Sinclair membrane.
- Start Peeling at one corner and carefully peel off.
- Use additional water to aid release.
- Ethylated Spirits will also assist in removing difficult area which was painted too thin.
Edit
Talk to Expert
Name
*
Company Name
*
Position
*
*
Phone
*
Product Brochure
*